One of the necessary tips when using a smart device is how to fix the stuck button. In this article, we would like to give you some tips to do that. Let’s have a look!

How to fix the stuck buttons on your device: 3 easy steps

Step 1: Clear around the buttons. Firstly, you should turn off your device and better remove your battery also. Then dip the Q-tip into high-percentage isopropyl alcohol, it will clean your device better than normal water. With that wet Q-tip, you can easily clean the sides of your stuck button and remember to clean as far down to the cracks as possible. One more little thing is you should turn your device upside-down to prevent alcohol from seeping into your phone. Finally, clicking the button a few times to free grime left.

Step 2: Clean the frame. Now it is time to clean the parts of your device that the button protrudes from. When your button was working as normal, you couldn’t be able to clean it because the button usually fills this gap. However, things will get easier when you press down on a stuck button. You can tightly hold one side of the button down and use the Q-tip to clean inside the frame. Afterward, do it again for the other side.

Step 3:  Blow debris with canned air. After cleaning all around the button, you can use a canned air and free the remaining debris. Finally, your button will be very clean you can click it much easier than before. If it is still not working, go back to step one and remember to clean it more carefully.

How to fix the stuck buttons on your device: round-up

The old device is the easiest to have this problem. As you can see, fixing your stuck button is not hard at all. You just need to follow these steps and it won’t be a big problem anymore. We will keep updating other useful tips for your devices. So stay tuned!